CPU |
-
VIA Eden™ V4 500 MHz
-
VIA Eden™ V4 1 GHz
-
VIA C7 1.5 GHz
-
VIA Nano compatible
|
内存 |
|
芯片组 |
|
BIOS |
|
板载 LAN |
-
2 x 10/100/1000 network connection Realtek RTL8110SC
-
Each LAN port reserved with 2-pin header for extended LAN LED (Active, Link 100, and 1000 LAN LED)
-
Supports Wake on LAN (When 5 Vsb power available).(LAN1 is available for Wake up, LAN2 is not available for Wake up)
|
音频 |
-
VIA, VT1613 CODEC for AC97
-
V 2.0 MIC-in, Speaker-out, CD-in, Line-in
|
图像 |
-
VIA VT1636 transmitter
-
Analog VGA Interface:1 x DB15 connector LVDS Interface:2 x DF13 20-pin LVDS connector for internal connection, supports single (18bit)or dual pixel (36bit) LVDS panel
-
CCFL: 1 x CCFL for LCD panel backlight inverter power
|
I/O 接口 |
-
串口: 4 个 1x 40 pin 头接口, COM 2 for RS 232/422/485
-
USB 2.0 x 4
-
并口: 1 个 2x13 box 头接口 (2.0 mm)
-
PS/2: 1 x Mini-Din for Keyboard/Mouse
-
Digital I/O: 2x4 pin header (2.54 mm)
-
IrDA: on-board pin header for IrDA Tx/Rx
-
SMBus 2.0 controller
-
On-board header for reset SW and HD active LED
-
I2C: On-board 3-pin header for I2C, one pin for GND
-
1 x DB15 VGA port
|
看门狗时钟 |
|
板载 RTC |
|
存储设置 |
|
系统监视器 |
-
Derived from Super I/O to support system monitor
-
Monitoring of 5 voltages, 3 temperatures and 2 fan speeds.
-
5 voltage (For +3.3 V, +5 V, +12 V, Vcore and +2.5 V)
-
3 temperature (For CPU and two external for system)
-
2 fan speed ( one for CPU and one for systems)
|
电源输入 |
-
3-pin header for AT/ATX mode switch
-
+3.3 V is converted from +5 V
-
6-pin power input connector
-
3-pin Jst connector to receive the 5 Vsb input from power source
-
Factory default setting is AT Mode
|
电源需求 |
-
CPU: VIA C7 1.5GHz/400MHz; Memory: 1 x DDR2 1GB
-
Full-Loading Mode: 1.28 A(+12 V), 4.17 A(+5 V)
-
Light-Loading Mode: 0.36 A(+12 V), 1.71 A(+5 V)
-
NOTE:Full Loading: Utilize CPU 100% with Burn-in test running; Light Loading: Utilize CPU loading below 5% without application running
|
ATX 模式 |
-
电源需求: +12 V/+5 V/+5 Vsb
-
Supports Power On push Button, Software Shutdown function and LAN1 remote wake up only
-
2-pin Header for Power On Push Button
|
AT 模式 |
|
尺寸规格 |
|
环境 |
-
操作温度: 0°C ~ 60°C
-
存储温度: -20°C to 80°C
-
相对湿度: 10% ~ 90% (无凝露)
|
认证 |
|